Ecu wish list section.

RAC · July 6th, 2008, 04:15 AM

Dragracer187 · January 19th, 2010, 08:17 PM

I need to bump this, there are a few things that would be nice to have in the autronic ecu to make it even better. Do you think they will look at our feedback and use the info for future developments?

buzzard · January 19th, 2010, 08:21 PM

Autronic is always interested in product feedback. Probably best to email direct to Ian, not sure how often he reads this.

Chris

robert · February 14th, 2010, 11:16 PM

1) Would be better if you could change between AFR/Lambda in the software, should'nt be that much work to implant, since sensor can't read otherwise anyway?

2) Too few inputs.

RAC · February 15th, 2010, 08:25 AM

Lots of outputs just not many inputs, for the sm4.

robert · February 15th, 2010, 05:15 PM

Yes

gts_215i · May 19th, 2010, 12:09 AM

+ 1 for more inputs & ouputs

User configurable knock module (Dual Sensor)

Wogrocket · May 21st, 2010, 12:48 PM

what he said ^^^^^^^

Mick

Ekman · May 21st, 2010, 02:14 PM

Tooth acceleration measurement.

Misfire and knock detection.

July 6th, 2008, 04:15 AM	#1
RAC Senior Member Join Date: Feb 2008 Posts: 120	Ecu wish list section.

January 19th, 2010, 08:21 PM	#3
buzzard Moderator Join Date: Feb 2008 Location: Newcastle (Regional) Australia Posts: 1,052	Autronic is always interested in product feedback. Probably best to email direct to Ian, not sure how often he reads this. Chris __________________ He gets his lap dogs to do his talking for him. Buzzard is a good example.

February 14th, 2010, 11:16 PM	#4
robert Junior Member Join Date: Oct 2009 Location: sweden Posts: 4	1) Would be better if you could change between AFR/Lambda in the software, should'nt be that much work to implant, since sensor can't read otherwise anyway? 2) Too few inputs. Last edited by robert; February 22nd, 2010 at 05:28 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 19th, 2010, 08:17 PM	#2
Dragracer187 Senior Member Join Date: Jun 2008 Location: The Dragstrip Posts: 186	I need to bump this, there are a few things that would be nice to have in the autronic ecu to make it even better. Do you think they will look at our feedback and use the info for future developments?

February 15th, 2010, 08:25 AM	#5
RAC Senior Member Join Date: Feb 2008 Posts: 120	Lots of outputs just not many inputs, for the sm4.

February 15th, 2010, 05:15 PM	#6
robert Junior Member Join Date: Oct 2009 Location: sweden Posts: 4	Yes

May 19th, 2010, 12:09 AM	#7
gts_215i Junior Member Join Date: Sep 2009 Location: Australia Posts: 23	+ 1 for more inputs & ouputs User configurable knock module (Dual Sensor)

May 21st, 2010, 12:48 PM	#8
Wogrocket Junior Member Join Date: Oct 2008 Location: Mackay Posts: 15	what he said ^^^^^^^ Mick

May 21st, 2010, 02:14 PM	#9
Ekman Junior Member Join Date: Feb 2008 Posts: 12	Tooth acceleration measurement. Misfire and knock detection.