Announcement

Collapse
No announcement yet.

SMC and two stroke

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SMC and two stroke

    I have a SMC V1.94 with M&W CDI on my race car, 2L 4 cyl. Works fine. I am investigating a two stroke engine of similar size (4 cyl). Besides changing the M1 setup line 2 to two stroke from 4 stroke, what hardware or software changes will I need to make. Have searched around a fair amount and have not come up with good answers. Not at this time concerned about tuning issues, just basic set up of the ECU and sensors, particularly the sync (currently use a two tooth wheel on the crank and one tooth on the exhaust cam with Hall sensors)

    Thanks for any suggestions.

    jack
Working...
X