Announcement

Collapse
No announcement yet.

Good ignition coil for 500r cdi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Good ignition coil for 500r cdi

    Hello!

    I'm planing to buy some ignition coils for the rx7.
    2 rotor engine with sm4 and 500r cdi box!

    So what will be a good coil that will work with the autronic boxes?

    I was looking at the Crane cams PS92 sure they are big but I think I will find some room for them...

    MSD HVC also seams as a good coil?

    What coils do you guys use?

    Thanx in advance!

  • #2
    Those choices are both renowned for being good performance coils used in numerous racing applications with success.

    I have recently just installed a pair of the smaller lightweight Crane LX91 coils to try alongside the SM4/500R on my E85 supercharged twin distributor V8. So far, so good.

    But also have several friends running the MSD HVC series coils on their non efi pushrod V8's in racing applications with plenty of positive results.

    Hope this is of some help.

    Comment


    • #3
      I am using the M&W mercury outboard coils. work great so far

      Comment


      • #4
        I was also been thinking of up grading my syst. For my zetech 2.0 turbo. And looking at the same items good to know that they are no issues. I found a site that supplies the super snakes mustangs and the 500s. Am leaning towards these for they use them for the Shelby's / fords. Weaponxperformance. Any feed back would be great! Txs.

        Comment


        • #5
          This is the coils i ended up with...

          MSD 8232....



          A pic of the mounted in a row
          http://wankelregistret.se/forum/atta...s/dsc_1624.jpg

          Will give a review when i have started the engine!

          BR Johan

          Comment


          • #6
            Bumping this thread up! Am running a 2.3litre 4G63 (EVO2) with a Garrett GTX3076R turbo running 26psi and E85. Car is making 410hp atw and tuned with a SM4v1.09. Am using LS2 coils with the inbuilt ignition setup and the spark is now breaking down. I've gapped the plugs right down but after a few runs when everything gets hot it starts to sputter. Am going to a CDI 500R setup and was looking at these coils (http://www.motec.com.au/ignition/cdicoils/) the Mercury CDI coil #42024. Any thoughts?
            '94 Mitsubishi Lancer CC Coupe - track spec.

            Comment


            • #7
              http://www.atlanticmarinedepot.com/e...00-p-9442.html

              Arnt they the same coils as these, I guess so going by the name and look. Also cheapest i found online was about $16 but with Aust dollar not being so good that could have changed. Would be good to know what motec sell them for.
              CISCOKIDS
              The Gentlemen's Club
              Midnight Rocker

              Comment


              • #8
                MERCURY / FORCE IGNITION COIL MALLORY 9-23200

                selling, now?

                Comment


                • #9
                  What about these?

                  http://www.nzefi.com/product/high-energy-cdi-coil/
                  '94 Mitsubishi Lancer CC Coupe - track spec.

                  Comment


                  • #10
                    Found out they are these!

                    http://paradiseracing.com/wp-content...MSD-8232-1.jpg
                    '94 Mitsubishi Lancer CC Coupe - track spec.

                    Comment

                    Working...
                    X
                    okeygabilesohbetdikmen evden eve nakliyatankara evden eve nakliyatdireksiyon dersifreier pornoFilm porno francaisko cucehttps://www.ko-cuce.net/index.php?forumlar/server-tanitimi.5/ko cucebtc yorumpornohd videoshindi porn videospornhdvideoČeské Porno zdarmajigolokayitci #yaslikurt# Hack haber instagram hackleme sitesi Hack forum