Announcement

Collapse
No announcement yet.

SMC 2.00 B3 trigger Config for a 2002 on Subaru (in the right forum!)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SMC 2.00 B3 trigger Config for a 2002 on Subaru (in the right forum!)

    Evening!
    Is there any documentation for the Mode config for the SMC 2.00 B3 firmware to suit a WRx motor ( 2003 on..)

    (Cars got injector and Ignition, with +1 on mode 7. Rpm is jumpy. Its firing 2 sparks really close then a long pause as if its picking up both teeth on the cam trigger as a spark event.. if that makes sense)

    Car ran with a 1997 motor and the 1.90 Firmware

  • #2
    Ok, For a 1.99 you apparently set the below to let you use a 2000 on (36-2-2-2) triger:
    Mode13=32
    Mode14=0
    mode15=0

    Is that right for a 2.00 chipset?

    Comment


    • #3
      1.99 will not run 36-2-2-2 trigger.
      He gets his lap dogs to do his talking for him. Buzzard is a good example.

      Comment


      • #4
        So for future seekers of the solution, The answer is:

        For a 36-2-2-2 Crank trigger, 2 trigger (90 deg offset) cam triggers

        2.00 B2 Beta chip
        mode 7 is 0
        Mode 13 is 64

        Starts like a charm!

        Comment

        Working...
        X
        okeygabilesohbetdikmen evden eve nakliyatdireksiyon dersifreier pornoFilm porno francaisko cucehttps://www.ko-cuce.net/index.php?forumlar/server-tanitimi.5/ko cucebtc yorumpornohd videoshindi porn videospornhdvideoČeské Porno zdarmajigolokayitci #yaslikurt# Hack haber instagram hackleme sitesi Hack forum