Announcement

Collapse
No announcement yet.

SMC for Evo 6 and PWM table Output assignment

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SMC for Evo 6 and PWM table Output assignment

    Hi,

    ECU SMC 1.99 for Evo 6.

    I've got AC working in my car on Pin A22 (inj O/P 7). It uses On/off table to switch AC when AC key is pressed and engine revs are higher than 625.

    What I wanted to do is to use PWM table as On/off switch for Exhaust cutout solenoid depends on Load/Revs but which output do I have to use ?
    I could only select Aux Output but what pin is it ? Is it Boost control O/P (A11) ? I'm not using this output because I have Profect Spec B boos controller.
    Or there are some limitations on my Ecu and I have to do it different way?

    Mick

  • #2
    It should be pin pin 12 Aux O/P (boost/idle) and pulls to ground.
    Robert Jansson
    MRM-Racing

    Comment

    Working...
    X