No announcement yet.

MY98 WRX STi Cal wanted

  • Filter
  • Time
  • Show
Clear All
new posts

  • MY98 WRX STi Cal wanted

    I'm chasing a cal file for a SMC (1.92) to suit a 1998 EJ20 STi.

    I'd be happy to look at a plug and play file as well.

    The engine has a VF30 fitted, using the PWM output for boost control, its running 800cc SARD injectors and an AEM cdi.

    Basically I am after any SMC based (including PNP) cal file to suit an MY98 EJ20 anything with the injectors I am running would be a plus.

    I have a freshly built engine going into the car but no map to even do a startup on that won't fuel wash the bores before I take it to the dyno.

    Thanks in advance.

    Driven FX

  • #2
    Here is a stock WRX 98 PnP file you can convert that to 1.92 (pnp = 1.99)
    Attached Files
    Robert Jansson


    • #3
      Thank you very much.

      You don't happen to have an injector calibration for 800cc High impedance sards?


      okeygabilesohbetdikmen evden eve nakliyatdireksiyon dersifreier pornoFilm porno francaisko cuce cucebtc yorumpornohd videoshindi porn videospornhdvideoČeské Porno zdarmajigolokayitci #yaslikurt# Hack haber instagram hackleme sitesi Hack forum