Announcement

Collapse
No announcement yet.

Autronic MY99-00 WRX STi PnP ECU

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Autronic MY99-00 WRX STi PnP ECU

    Could someone please point me to where i could find a default map for the MY99-00 PnP ECU's.

    I purchased the ecu and let my tuner try to tune my car but the tune seem's to be a mess. The car run's fine when driving but when backing off the throttle the engine sometimes stalls and during idle it hunts then sometimes level's off and sometimes stalls.

    I wanted to load a Autronic default map to see how my car idles and runs.

    Also my car is a MY99 STi WRX which comes with a climent controlled aircon which does not seem to be working any more? the aircon light come's on and a relay clicks but no cold air? i had my mech check the gas in the system and it seems to be 3/4 full? Can the air con be de-activated in the ecu?

  • #2
    Here is a default Subaru 99-00 cal file. I have two versions.
    Attached Files
    Robert Jansson
    MRM-Racing

    Comment


    • #3
      Thank you

      Comment


      • #4
        Found the latest file that is delivered with the pnp board.
        Attached Files
        Robert Jansson
        MRM-Racing

        Comment


        • #5
          Originally posted by MRMRacing View Post
          Found the latest file that is delivered with the pnp board.
          Does this work for all wrx pnp years? I need a stock-base for 95 wrx pnp smc 1.99. I previously assumed wrx pnp smc(and sm2?) base- stock maps are specific for each engine series ie 93-96, 97-99. The newer wrx pnp 2000-current would be completely different do to being based on sm4.

          Comment


          • #6
            I tried Cal files here but they bring lots of error messages when load on SM4 1.09. My Ecu is not pnp version. Will cal files here (above) work? Thanks.
            Last edited by 99sti; March 2nd, 2014, 01:42 AM. Reason: more info

            Comment


            • #7
              Can anyone help me with Subaru MY00 WRX .cal file. Any cal that runs on WRX or STI 2.0 liter engine should be good enough. I need to it to load to my SM4 1,09 becuase I need to erase the flash to un-password protect the ecu.. Base or tuned .cal should be OK. I can use that as starting point..Thanks.

              Comment

              Working...
              X
              okeygabilesohbetdikmen evden eve nakliyatdireksiyon dersifreier pornoFilm porno francaisko cucehttps://www.ko-cuce.net/index.php?forumlar/server-tanitimi.5/ko cucebtc yorumpornohd videoshindi porn videospornhdvideoČeské Porno zdarmajigolokayitci #yaslikurt# Hack haber instagram hackleme sitesi Hack forum