View Full Version : Upgrading sm2 ver 1.37 -> 1.49
mc_yen
January 24th, 2009, 10:13 PM
Hi people, i'm from singapore. I'm currently using a sm2 ver 1.37.
I read from the manual that the Sm2 mode flag ver 1.37 does not have the launch control function (dual rev limit).
How do i upgrade the version from 1.37 -> 1.49 in order to have this function?
Is the upgrade in the form of chip or firmware upgrade?
Must i send the ecu back to autronic australia for upgrade? or can i find a local dealer to do it for me?
Can any kind soul shed some light.
:)
Chris
January 24th, 2009, 10:49 PM
Hi people, i'm from singapore. I'm currently using a sm2 ver 1.37.
I read from the manual that the Sm2 mode flag ver 1.37 does not have the launch control function (dual rev limit).
How do i upgrade the version from 1.37 -> 1.49 in order to have this function?
Is the upgrade in the form of chip or firmware upgrade?
Must i send the ecu back to autronic australia for upgrade? or can i find a local dealer to do it for me?
Can any kind soul shed some light.
:)
The upgrade comes in the form of a micro controller chip. In Singapore, your dealer is Alex.
THIAM SENG AUTOTRONIC
Alex Lim
BLK 10 Ang Mo Kio Industrial Park Tel: 65-6-4835497
2A # 03-02 AMK AUTOPOINT Mobile: 65-9-7477987
Singapore (568047) Email: alex@tsautotronic.com
mc_yen
February 22nd, 2009, 06:50 PM
The upgrade comes in the form of a micro controller chip. In Singapore, your dealer is Alex.
THIAM SENG AUTOTRONIC
Alex Lim
BLK 10 Ang Mo Kio Industrial Park Tel: 65-6-4835497
2A # 03-02 AMK AUTOPOINT Mobile: 65-9-7477987
Singapore (568047) Email: alex@tsautotronic.com
Hi buzzard, appreciate your reply. Can i also check if i do the chip upgrade, will i lose my previously tuned map?
thanks!
Chris
February 23rd, 2009, 01:27 PM
You will not lose the map.
Chris