Mitsi Galant VR-4 v6

[Pavlo]

I've managed to get an SM4 running a Galant Vr-4 on standard triggers. It uses the 1.09 chip and the "Mitsubishi 6c" trigger settings, but I have had to change the firing order to 2-3-4-5-6-1 to get the correct timing as the cyl lead was limited to 65-85º and really it wants to be -5, or am I missing something?

I have tweaked the offset based on results from the scope, as I know where I should be seeing the ignitino event for cyl 1 relative to the long cam trigger signal.

[Ian]

Hi Pavlo,

I just checked the software selection and think one of the parameters is wrong but is greyed out so you won't be able to change it. If you attach your cal to a post I will edit it for you.

[Pavlo]

I would rather stay in control! Currently I've got it sorted, but I guess it would be most useful to you if i post some scope readings (would have been lost without scope function in 1.09!) along with curren settings.

Thanks for the reply

Paul