Help with injector settings Denso 1000 cc

[TomK]

can not find anything similar in the list.
Should you choose a generic medium in the list instead?
And set to High/saturted?

[Ian]

What colour are they and are they single or twin spray? Side feed or top feed?
Are you sure they are not a smaller Denso injector that has been decapped or modified because all the 1000cc Denso injectors I am aware of are low resistance (and mostly low current)?

[TomK]

They are brown with single spray and top feed.
It is possible that they are modified.
There is no number at all on them, except 1000 at the front.

They are sent away now for flow control.

Picked them up next to free so it would be fun if i can use them.
Otherwise i maybe has to get ID1000.

[TomK]

I have now measured the resistance on the injectors 15.5 ohms
The question then is whether to run on generic injector medium
or choose an injector that has the same resistance and enter the correct value of the overall fuel mul?

[TomK]

I found one in the Autronic software called DENSO 195500-4060 @ 15.5 ohms
Maybe I can use it? It is the only one there in the list with a resistance of 15.5 ohms.

[Ian]

The only Denso injectors I am aware of like you have are some 13B turbo secondary injectors so I would use Denso 1955001370 Red or Maroon selections.

[TomK]

This is what my injectors look like.
http://www.zatzy.com/members/tomk-albums-div-picture5407-injector.jpg