Cal file for wrx 2002

[rollin]

I am new to this forum. Please could some one help me with a cal file and jumper position for a 2002 WRX PnP board. Thanks

[MRMRacing]

What chip version do you have?
Cam control or not?
There is a difference from 1.06 to 1.07 chip in cam settings.
Hardware jumpers below, most I/P jumpers can be found in software.


Jumper Type Function and Settings

JP1, 4 pin twin 1-2 & 3-4 Aust and EU 1-3 & 2-4 Asia


JP2, 4 pin twin 1-2 & 3-4 Aust and EU 1-3 & 2-4 Asia


JP3, 3 pin single 2-3 WRX and 1-2 STi


JP51, 3 pin single 1-2 Internal MAP sensor 2-3 Subaru MAP sensor

[rollin]

Thanks for answeing back. No cam control I dont know as I do not have the board hear what is the differance between the chip. This board was ordered for a 2005 Sti but is going to be used on a 2002 WRX.

[MRMRacing]

Here is a WRX file (no camcontrol) and a STI file (camcontrol).

[rollin]

Thanks Robban I will try it in the morning.

[MRMRacing]

Thanks for answeing back. No cam control I dont know as I do not have the board hear what is the differance between the chip. This board was ordered for a 2005 Sti but is going to be used on a 2002 WRX.

Well Ian is the gury on Subarus ;) , From memmory there are some changings in cam values but your wrx version is not involved.

[MRMRacing]

Here is the wrx file, the first deleted file had an error.