Kevin Black
March 16th, 2008, 05:30 PM
I'm using 4.20 software on an SM2 1.49, and there are several settings that are different than what the mode flag help calls for.
Example boost control and idle control modes 5 and 6 are mixed up, and there is a number "1" in mode 3 which there is no help option for(just 32 and 64). The "1" is tied to the fan 2 select coolant/charge temp.
Anyway, will this work by 1) making the selections in the software or 2) making the selectings in the mode flags?
I have the old 3.36 software here, but it hangs up on my newer laptop.
I'll have to dig out the old laptop if the 4.20 software wont work :)
EDIT: Found that the 3.36 software must be the manual tune version to support the 1.49 cpu.
Example boost control and idle control modes 5 and 6 are mixed up, and there is a number "1" in mode 3 which there is no help option for(just 32 and 64). The "1" is tied to the fan 2 select coolant/charge temp.
Anyway, will this work by 1) making the selections in the software or 2) making the selectings in the mode flags?
I have the old 3.36 software here, but it hangs up on my newer laptop.
I'll have to dig out the old laptop if the 4.20 software wont work :)
EDIT: Found that the 3.36 software must be the manual tune version to support the 1.49 cpu.