MRMRacing
March 4th, 2008, 12:32 PM
We have one PnP made by Ray that work fine except the active 4wd. 4wd ECU says missing TPS signal, pin 56 is TPS out to LSD, we have tryed link it with TPS in signal with no luck. From some diagram I have seen pin 57 Throttle Valve power supply also going to LSD. Anyone ever did a 4wd and have the active 4wd working?
MRMRacing
March 5th, 2008, 09:41 AM
The fix is a Diode 1N4148 from pin 38 to pin 56.
cuddy
June 11th, 2008, 02:32 PM
is this the pins for the standard computer
MRMRacing
June 11th, 2008, 09:36 PM
Yes the numbers are stock ECU pin.
RAC
September 4th, 2008, 08:37 AM
Hi Robert, how did you get one with this car in regard to timing control, in particular under load using the factory cas with the 1.09 ?
MRMRacing
September 4th, 2008, 12:13 PM
I do mot know since they are installed by a dealer to me...